Foot Peg Extensions
Optional sizes:
DIY KIT
$105 TOP- short MX
$130 MIDDLE- standard
$140 BOTTOM- long touring
(shown on bike)
Anodizing $10 extra.
Shipping in the US is $7
Outside the US $15
Purchase 2 or more set and
get free shipping in the US.
Send your pegs and springs in
and I'll send you back a ready
to install set for $30 extra.
DIY KIT
$105 TOP- short MX
$130 MIDDLE- standard
$140 BOTTOM- long touring
(shown on bike)
Anodizing $10 extra.
Shipping in the US is $7
Outside the US $15
Purchase 2 or more set and
get free shipping in the US.
Send your pegs and springs in
and I'll send you back a ready
to install set for $30 extra.
This version is for KTM pegs
PN
590.03.041250
590.03.040250
PN
590.03.041250
590.03.040250
NO OTHER VERSIONS AVAILABLE AT THIS TIME, BMW 800 GS, DRZ 400, PIVOT PEGS, FASTWAYS, AND OTHERS
IN THE WORKS FOR THE FUTURE.
IN THE WORKS FOR THE FUTURE.
These use your stock foot pegs as a platform, but
add length and width. You can even use your stock
rubber pads for long touring. Take the rubber pads
off and you have a large stable platform for off road
use. Go from a large touring platform to smaller MX
pegs in only 6 bolts.
Offered in a DIY (Drill it Yourself) kit or a complete
pegs/extension combo when I have stock pegs in
stock.
add length and width. You can even use your stock
rubber pads for long touring. Take the rubber pads
off and you have a large stable platform for off road
use. Go from a large touring platform to smaller MX
pegs in only 6 bolts.
Offered in a DIY (Drill it Yourself) kit or a complete
pegs/extension combo when I have stock pegs in
stock.
BMW 800 GS pegs are in testing.
Pegs that I have in stock:
KTM
MX - Orange
Standard - Machine finish, Orange, Black
Long - Orange, Black
This changes often, so please contact me to be sure these are in stock.
I have stock pegs available if you want a ready to bolt on kit and a few good used peg sets if you'd
prefer to exchange for a set of pre-drilled and installed extension.
Standard - Machine finish, Orange, Black
Long - Orange, Black
This changes often, so please contact me to be sure these are in stock.
I have stock pegs available if you want a ready to bolt on kit and a few good used peg sets if you'd
prefer to exchange for a set of pre-drilled and installed extension.
LONG VERSION
More pegs in production.
All peg versions now have Stainless pins installed as shown below, except MX pegs.
The picture above shows the size difference.
The picture above shows the size difference.
Standard on top, Long on bottom.
Long Version
Long pegs actually add 1.62" in length.
Standard pegs add .95" in length
Standard pegs add .95" in length
Customer Replies
"I purchased the Foot Peg Extensions for my 08' KTM 990
Adventure, because I found the stock pegs were a little small
for me and after riding all day they would become pretty
uncomfortable. After installing CJ Designs LLC Foot Peg
Extensions, they have really changed the way I ride my bike. I
can use a wider stance and provide a bigger platform for my
size 13's. After consulting with Craig, we decided the Long
Touring Pegs would be my best choice. Of course, the
machining and design again are top notch. A +++"
Doug, CA
Adventure, because I found the stock pegs were a little small
for me and after riding all day they would become pretty
uncomfortable. After installing CJ Designs LLC Foot Peg
Extensions, they have really changed the way I ride my bike. I
can use a wider stance and provide a bigger platform for my
size 13's. After consulting with Craig, we decided the Long
Touring Pegs would be my best choice. Of course, the
machining and design again are top notch. A +++"
Doug, CA
Race Tested and CJ approved !!!
 |
 |
 |
 |
 |
NEW Rally Pegs in testing!!
$110 for the extensions.
You weld them on.
These are aggressive for racing
and serious riders. NO Tennis
Shoes. They provide a lot of bite
and traction.
If you have a set of pegs and
want them welded on send them
in. Welding is $30/ set. I may be
able to offer an exchange if I have
pegs in stock.
Other bikes possable, send it
your pegs for me to look at.
You weld them on.
These are aggressive for racing
and serious riders. NO Tennis
Shoes. They provide a lot of bite
and traction.
If you have a set of pegs and
want them welded on send them
in. Welding is $30/ set. I may be
able to offer an exchange if I have
pegs in stock.
Other bikes possable, send it
your pegs for me to look at.