KTM LC8 Clutch Cover / REKLUSE CLUTCH
Contact us for the best Rekluse combo package offered anywhere!  After installing a Rekluse Pro-Start clutch in my 06 950 ADV S, I found that my orange after-market KTM cover no
longer fit.   Wanting something different, yet functional, I made a cover that is 1.4lbs and very strong.  Made out of 6061-T6 aluminum, Titanium, Polycarbonate, stainless hardware and
O-ringed.  This offers a clean, leak proof cover that's easy on and off, just like your stock cover. (No more than 10 Min. install time)

-Reinforced with Titanium where your brake lever would crack your stock cover, or dent the after-market KTM cover in a crash.

-This cover is minimally thicker (overall height) than your stock cover, even though there is .375" of protection in areas to prevent crash damage.

-Also allows you to visually check for oil contamination when river crossing are often, or you have a tip over.  (this is not a wet sump motor so this is not a sight glass for oil level)

-This is an easy way to make sure your clutch bolts are not loosening up,  catastrophic failure occurs when that happens.

-Reuse your stock clutch cover gasket and is fully rebuild-able if need be.

-The stock cover has a Vibration dampener on the inside, this does not.  Removal will not effect engine performance.

*if any cover part should fail for mechanical reasons, I will rebuild it, or refund your money with pre-paid return of item.  If failure is because of a crash, that will be dealt with a review of
that instance, cost of rebuilding will be your responsibility.*
$459 + shipping for TITANIUM
Urique River, between Batopilas and
Urique in Copper Canyon Mexcio
The fish didn't know what to think????
I bet  it looks just as cool underwater.
990 Super Duke

This full pocket cover lets the entire clutch to be viewed and adds just enough
flash to really set your bike apart.

With your feet being set back from the cover,  Titanium is replaced with 6061
Aluminum Anodized in Black or Orange.     More color combos and cover
designs coming soon.
Shown above are some of the color combos
available with the Aluminum anodized top plates.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
-Stock cover is .96 lbs w/o metal dampener
inside

-CJ Designs cover is 1.4 lbs

Small weight gain for the amount of  strength
and protections added.
Titanium faced clutch
covers for:

-950/990 ADV
-950 SE
-950 SM  
-990 SMT

Half Spoke
1              2             3
These covers have anodized 6061 aluminum top faces instead
of Titanium.

All Aluminum covers:
Price is $379 + shipping
Perfect for KTM 950/990 ADV, 950 SE, 950 SM, 990 SMT
FULL TWIST
FULL WINDOW
FULL SPOKE
SUPER DUKE covers can be used on
the 950/990 ADV, 950 SE, 950 SM.

Only difference is the lack of full protection in the
brake lever area in a crash.
HALF SPOKE
4
Most of these are back in stock, Please contact me for your preferred style.  These are
assembled to your color choice when you order, so it may take a day or so to ship.
Customer Replies:
"Hi Craig, just wanted to drop you a note about how cool that clutch cover looks.  Started the Rekluse
install on Friday, and come to find out, they put the wrong size pressure plate in the kit.  However a
quick call to the folks at Rekluse and they immediately shipped out the correct one next day air so I
got the install done on Saturday.  They were very apologetic and admitted that this had happened with
some kits, but they thought that they went though the stock and corrected them.  Very easy folks to
deal with, very accomodating.  It was pretty darned funny though.  I was scratching my head for hours
trying to get the wrong pressure plate to fit, convinced that I had screwed something up along the way
:-)  Anyway, with the correct part the install was a breeze, did the break in, then did an oil change.  The
Rekluse is awesome, just awesome.  However, the bling of your clutch cover is better than the clutch
itself :-)  You should have heard the comments I already got on that cover:  "awesome!"  "a work of
art."  "wow, I want one!"  "man, that is beautiful!"  so you should be stoked about that.

Anyway, thanks again for shipping the stuff out to me quickly so I was able to use my buddy's shop to
do the install.  I leave for Baja next week :-)  Will post some pics of your artwork being "Baja tested" in
the vendors section when I return.

Hope you had a great Christmas and New Year.  All the best to you for 2009.

thanks, Vin"
CA, USA
"Hi Craig,

Just wanted to let you know that I received the cover this morning!
To say that it's fantastic would be an understatement!  I'm really
impressed, can't wait to put it on the bike this afternoon! Thanks
again for your great product and service.

The cover is on the bike. It's out of this world! I found myself
walking to my garage for the third time just to see it again on my
adv.! If the weather gets any better sooner than later, I'll make it a
bit muddier as well!

I will also recommend your product to a couple of Greek KTM
forums."

Many thanks,
Haris

Greece
Cover installation instructions
ADVrider link
You want the strongest clutch cover for your bike?  Look no further.  Go for Titanium!!
"I've purchased two CJ Designs LLC clutch covers.  The one I purchased for my 08' KTM Super Duke was black on black anodized with the spoked cover, and  was
for pure BLING factor.  The one I purchased for my 08' KTM 990 Adventure was for pure functionality, it is black anodized with the titanium cover.  CJ Designs LLC's
products are unique and are made with top notch craftsmanship.  The cover on my Super Duke was liked so well by a buddy of mine on the East Coast, he sold his
Rizoma clutch cover on Ebay and purchased a black with black swirl CJ Designs cover.  Now all I need is to save enough money to put Rekluse Auto Clutches in
both of my bikes. "

Doug
CA, USA
HALF TWIST
5
Full Face  "100%" protection.
Twist TI version